User Manual Q&AAnswer
Jun 11, 2024 - 12:53 AM
To adjust the motion sensor sensitivity on the GE 46707 Ultrabrite LED Light, please follow these steps:
1. Locate the ON/AUTO/OFF switch on the side of the light.
2. Set the switch to the "OFF" position.
3. Wait for at least 10 seconds.
4. Set the switch to the "AUTO" position.
5. The motion sensor sensitivity will now be reset to the default setting.
If you find that the light still turns on when there is no motion in the room, you can try adjusting the placement of the light. Make sure there are no obstructions blocking the motion sensor's view and that it is positioned in an area where motion detection is desired.
For further assistance or if you have any other questions, please refer to the user manual provided with your purchase or contact GE customer service at (800) 432-2737.
Add New Comment