User Manual Q&AAnswer
Jun 11, 2024 - 12:48 AM
Installation of the EverBrite Motion Sensor Night Lights is straightforward and can be done using either screws or double-sided tape. Here are the step-by-step instructions:
1. Choose a suitable location: Decide where you want to install the lights. They can be mounted on walls, fences, or other surfaces.
2. Mounting with screws:
a. Use a screwdriver to remove the mounting plate from the back of the light by sliding it.
b. Insert the provided screws into the mounting holes on the plate.
c. If mounting on drywall, use the plastic anchors included with the screws. Insert the anchors into the pre-drilled holes.
d. Align the mounting plate with the desired location and fasten the screws securely.
3. Mounting with double-sided tape:
a. Clean the surface where you want to mount the light to ensure good adhesion.
b. Peel off the protective backing from one side of the double-sided tape.
c. Stick the tape onto the back of the light.
d. Peel off the remaining protective backing from the tape.
e. Press the light firmly onto the desired location to secure it.
4. Repeat the installation process for each light in the package.
Please note that the EverBrite Motion Sensor Night Lights come with screws, anchors, and double-sided tape for your convenience. Choose the installation method that suits your needs and follow the instructions accordingly.
Add New Comment