User Manual Q&AAnswer
Jun 11, 2024 - 12:35 AM
Installing the Cruise On 91 Motion Sensor Magnetic Night Light is a simple process. Here are the step-by-step instructions:
1. Choose a suitable location: Decide where you want to install the night light. It can be placed on metal surfaces using the magnetic base or on non-metal surfaces using the adhesive pads.
2. Magnetic Base Installation: If you're using the magnetic base, find a suitable metal surface and attach the night light by placing the magnetic base against the surface. The magnet will hold the light in place.
3. Adhesive Pad Installation: If you're using the adhesive pads, clean the mounting surface thoroughly to ensure proper adhesion. Peel off the protective backing from the adhesive pad and firmly press the night light onto the desired surface.
4. Adjust Settings: Once the night light is installed, you can customize the brightness levels and motion sensor sensitivity according to your preference. Refer to the user manual for instructions on adjusting these settings.
5. Enjoy Illumination: The Cruise On 91 Motion Sensor Magnetic Night Light will automatically illuminate when motion is detected within its range, providing convenient lighting whenever needed.
Please note that the night light requires three AAA batteries (not included) for operation. Make sure to insert the batteries properly before installing the night light.
For further assistance or detailed instructions, you can refer to the user manual that comes with the product.
Add New Comment