User Manual Q&AAnswer
Jun 10, 2024 - 05:24 AM
To change the color and brightness of the WHA&DARREN HY906 Large Rabbit Night Light, you have two options: remote control and touch control. Here are the step-by-step instructions for both methods:
Remote Control:
1. Make sure the night light is turned on by pressing the power button on the back.
2. Use the remote control to select the desired color. The night light offers 9 soft light colors.
3. To adjust the brightness, use the brightness control buttons on the remote control. There are 10 brightness levels to choose from.
4. If you want to change the working mode, use the mode button on the remote control. The night light has three working modes: monochrome, breathing mode, and flickering mode.
5. To turn off the night light, press the power button on the remote control or the power button on the back of the night light.
Touch Control:
1. Make sure the night light is turned on by pressing the power button on the back.
2. Tap the night light gently to cycle through the different colors. Each tap will change the color to the next one in the sequence.
3. To adjust the brightness, long-press the power button on the back of the night light. Keep pressing until you reach the desired brightness level.
4. If you want to change the working mode, double-tap the night light. Each double-tap will cycle through the three working modes: monochrome, breathing mode, and flickering mode.
5. To turn off the night light, press the power button on the back of the night light.
Please refer to the user manual for additional information and troubleshooting tips.
Add New Comment