User Manual Q&AAnswer
Jun 10, 2024 - 04:47 AM
Sure! Here is a step-by-step guide on how to use the MEGAWISE AS1080 TENS Unit Muscle Stimulator:
1. Prepare the pads: Connect 2 pads to the cord by snapping them on. Use the 1/4 wire and make sure to use 1pc positive + 1pc negative wire. Remove the protective film from the pads.
2. Placing the pads: Place the pads where you want the massager to impact, over or near the injured area of the body. Make sure your skin is free from any dirt, oil, or lotion.
3. Connect the wires: Connect 2 or 4 pads to both wires (A/B channel). Place all connected pads on your skin at the same time for additional relief.
4. Set up the timer: Turn on the device by pressing the ON/OFF button. Press the "T" button to adjust the time. Set up a time from 10 to 60 minutes. The device has a default timer of 20 minutes.
5. Choose a mode: There are 6 main modes with 4 built-in modes each. Press the "M" button for 2 seconds to switch between the 6 main modes. Press the "M" button quickly to choose the built-in modes for each main mode. The device has a mode memory function.
6. Adjust the intensity: Once you select a mode, press the "+/-" buttons to gradually increase or decrease the intensity. The default strength is the lowest strength set by each selected mode to avoid misoperation.
7. A/B channel switching: Short press the round center button to switch from A channel to B channel. Repeat steps 5 and 6 to operate the mode and intensity of the B channel.
8. Lock the screen: After setting both A and B channels, long-press the round center button for 3 seconds. The screen will show a lock symbol, and all buttons will be blocked. This function is designed to avoid mistouch.
9. Shut off the appliance: The TENS unit will shut off automatically after the set time.
Remember to follow the precautions mentioned in the user manual, such as avoiding placing the pads near the heart, head, or carotid, and not using the device if you have certain medical conditions. It's also important to properly maintain and care for the device and pads as instructed in the manual.
If you have any further questions or issues, you can contact MEGAWISE customer service at support@megawise.com or visit their website at megawise.com for more information.
Add New Comment