User Manual Q&AAnswer
Jun 08, 2024 - 03:31 AM
To clean the electrode pads of the OMRON PM500 TENS therapy device, follow these steps:
1. Turn off the device and disconnect the electrode cords from the pads.
2. Wash the pads when the adhesive surface becomes dirty and/or the pads are difficult to adhere.
3. Wash the pad softly with your fingertips under slow running cold water for several seconds. Do not use a sponge, cloth, or sharp object on the adhesive side, and do not use detergents, chemicals, or soap.
4. Pads can be washed after 15 uses, approximately ten times for up to 150 uses. Do not wash the pads too long or too frequently.
5. Dry the non-sticky surface of the pads and let the adhesive surface air-dry completely. Do not wipe with a tissue paper or cloth.
6. Pads are replaceable and can be purchased when needed by calling 1-800-634-4350 or visiting OmronHealthcare.com.
It is important to note that the life of the pads may vary depending on factors such as how often they are washed, the skin condition, and how they are stored. It is recommended to replace the pads when they no longer stick to your skin or if more than 25% of the pad's surface is not in contact with your skin.
Add New Comment