User Manual Q&AAnswer
Jun 03, 2024 - 04:58 AM
To change the color mode on the Silvotek Ksl1908 Kids Star Projector Lamp, follow these steps:
1. Make sure the lamp is turned on by pressing the power button.
2. Once the lamp is on, press the color mode button. This button is located on the lamp's control panel.
3. Each press of the color mode button will cycle through the available color modes. The lamp offers six different color modes: white, blue, yellow, sequential, combination, and slow fading.
4. Keep pressing the color mode button until you reach the desired color mode.
5. The lamp will remember the last color mode selected even if it is turned off and on again.
Note: The lamp also has adjustable brightness levels for each color mode. To adjust the brightness, use the brightness buttons on the control panel. Each color mode has three brightness levels: 10%, 50%, and 100%.
For more detailed instructions, please refer to the user manual provided with the Silvotek Ksl1908 Kids Star Projector Lamp.
Add New Comment