User Manual Q&AAnswer
May 30, 2024 - 02:11 AM
To set up and pair the Simjar QF02A Wireless Remote Control RF Key Finder Locator, please follow these steps:
1. Insert the included CR2032 lithium-ion batteries into the transmitter (remote control) and receivers. Ensure the batteries are properly inserted with the correct polarity (+/-).
2. Attach the receivers to the items you frequently misplace, such as keys, wallets, or remote controls. Use the included key rings or long chains to secure the receivers.
3. Turn on the receivers by pressing and holding the color-coded buttons on each receiver for a few seconds until you hear a beep. The LED lights on the receivers should also flash to indicate they are powered on.
4. Press any color-coded button on the transmitter to trigger the receivers. You should hear a loud beep and see the LED lights on the receivers flash.
5. The transmitter and receivers are now paired and ready to use. You can use the color-coded buttons on the transmitter to locate your items by triggering the receivers to emit a loud beep.
Note: If you need to replace the batteries in the future, simply remove the old batteries and insert new CR2032 lithium-ion batteries following the correct polarity.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with your Simjar QF02A Key Finder Locator.
Add New Comment