User Manual Q&AAnswer
May 30, 2024 - 12:55 AM
To set up and use the DEKOPRO CSP750P-US Portable Electric Water Transfer Pump, please follow these steps:
1. Ensure the pump is placed on a stable and level surface.
2. Attach the suction hose to the inlet port of the pump and place the other end in the water source you want to drain.
3. Connect the discharge hose to the outlet port of the pump and position the other end where you want the water to be transferred.
4. Plug in the pump to a standard 120V power outlet.
5. Turn on the pump and adjust the flow rate as needed using any included controls.
6. Monitor the operation of the pump to ensure proper functioning.
Please refer to the user manual included with your purchase for more detailed instructions and safety guidelines.
Note: It is important to clean the pump and hoses after each use to prevent debris buildup. Store the pump in a dry, cool place when not in use. Regularly check the power cord and hoses for any signs of damage. Do not submerge the pump in water beyond the recommended depth.
If you encounter any issues or have further questions, please refer to the troubleshooting section in the user manual or contact DEKOPRO customer service for assistance.
Add New Comment