User Manual Q&AAnswer
May 30, 2024 - 12:54 AM
Adjusting the flow rate of the Knifel CH-010 Ultra Quiet Fountain Pump is a simple process. Here's how you can do it:
1. Locate the control xxxx : The control xxxx is located on the front of the pump, near the power cord.
2. Turn the control xxxx : To increase the flow rate, turn the control xxxx clockwise. To decrease the flow rate, turn the control xxxx counterclockwise.
3. Observe the flow rate: As you turn the control xxxx , observe the water flow in your fountain. Adjust the flow rate until it reaches your desired level.
4. Test and fine-tune: Once you have adjusted the flow rate, let the pump run for a few minutes and observe the water movement. If necessary, make further adjustments to achieve the desired flow rate.
Remember to ensure that the pump is fully submerged in water at all times to prevent damage. Additionally, periodically clean the pump and its components as instructed in the user manual to maintain optimal performance.
For more detailed instructions and guidelines, please refer to the Knifel CH-010 Ultra Quiet Fountain Pump User Manual included with your purchase.
Add New Comment