User Manual Q&AAnswer
May 30, 2024 - 12:43 AM
Installing the Acquaer AUP033-6 1-3-HP Automatic Submersible Water Sump Pump is a straightforward process. Here are the step-by-step instructions:
1. Placement: Find a suitable location for the pump in the sump pit. Ensure that it is securely positioned and that the float switch can operate freely.
2. Connection: Connect the discharge pipe to the pump's outlet using appropriate fittings. Make sure the connections are tight and secure.
3. Power On: Plug the pump into a grounded electrical outlet. Ensure that the power supply is stable and meets the voltage requirements of the pump (115V/60HZ).
4. Automatic Operation: The pump is equipped with a built-in float switch that enables automatic operation. When the water level in the pit rises to 1-1/2 inches, the pump will activate and start pumping water. It will automatically deactivate when the water level falls below 1/4 inch.
Please refer to the user manual provided with the pump for any specific instructions or safety precautions that may be mentioned.
Add New Comment