User Manual Q&AAnswer
May 28, 2024 - 01:19 AM
Installing the Centralite 3315-C Water Sensor is a simple process that you can do yourself. Here are the step-by-step instructions:
1. Choose the placement: Select a location near potential sources of water leaks, such as under sinks, near water heaters, or in basement areas prone to flooding. Ensure that the sensor can be placed directly on a non-conductive surface like granite, tile, or concrete.
2. Pull-to-pair installation: To initiate the pairing process, pull the plastic tab located on the back of the sensor. This will activate the sensor and put it into pairing mode.
3. Pair with a ZigBee HA 1.2 certified hub: Open your ZigBee-compatible smart home hub's app or interface and follow the instructions to add a new device. Look for the Centralite 3315-C Water Sensor in the list of available devices and select it to start the pairing process.
4. Follow on-screen instructions: The app or interface will guide you through the pairing process. This may involve scanning a QR code on the sensor or entering a pairing code. Follow the on-screen instructions to complete the pairing.
5. Test the sensor: After successful pairing, test the sensor by applying a small amount of water near it. The sensor should detect the water and trigger an alert on your smart home system.
6. Monitor and customize: Once installed, you can monitor the sensor's performance and customize its settings through your smart home app or interface. This may include adjusting sensitivity levels, setting up notifications, or integrating it with other devices in your smart home system.
Please refer to the Centralite 3315-C Water Sensor user manual for more detailed instructions and troubleshooting tips.
Add New Comment