User Manual Q&AAnswer
May 28, 2024 - 01:15 AM
Installing the Flume F2000 2-Smart Home Water Monitor is a quick and straightforward process that can be completed in under 10 minutes without the need for professional assistance. Here are the step-by-step instructions:
1. Attach the Flume sensor to your water meter using the included strap. This does not require any plumbing alterations.
2. Place the Wi-Fi bridge within range of your home router to ensure a stable connection.
3. Use the Flume app on a compatible iOS or Android device to complete the setup process.
Here are more detailed instructions for each step:
Step 1: Attach the Flume sensor to your water meter
- Locate your water meter, which is usually located outside or in a basement.
- Wrap the included strap around the Flume sensor and secure it tightly to the water meter. Make sure the sensor is positioned correctly and securely attached.
Step 2: Place the Wi-Fi bridge
- Find a suitable location for the Wi-Fi bridge within range of your home router. It should be placed indoors, preferably near the water meter.
- Connect the power adapter to the Wi-Fi bridge and plug it into a power outlet.
Step 3: Complete the setup process using the Flume app
- Download and install the Flume app from your device's respective app store.
- Open the app and follow the on-screen instructions to create an account and set up your Flume device.
- Connect the Flume sensor to your home Wi-Fi network by following the app's instructions.
- The app may prompt you to take a photo of your water meter to help the system recognize the meter type for accurate data reporting.
Once the setup process is complete, the Flume app will display real-time data about your water usage. You can set custom alerts for potential leaks, track water consumption, and compare your usage over time.
If you encounter any issues during the installation process, refer to the troubleshooting section in the user manual or contact Flume customer support for assistance.
Add New Comment