User Manual Q&AAnswer
May 27, 2024 - 04:26 AM
To calibrate the Weewooday X008 Digital Hygrometer Temperature, please follow the steps below:
1. Prepare a calibration kit: You will need a glass of distilled water and a ziplock bag.
2. Fill the glass with distilled water: Make sure the water is at room temperature.
3. Place the hygrometer in the ziplock bag: Ensure that the hygrometer is fully sealed inside the bag.
4. Immerse the hygrometer in the glass of water: Insert the hygrometer into the water, making sure the sensor probe is fully submerged.
5. Wait for stabilization: Allow the hygrometer to stabilize in the water for at least 30 minutes. This will ensure that it reaches the same temperature and humidity as the surrounding environment.
6. Adjust the calibration xxxx : Look for a small xxxx on the back of the hygrometer. Using a small screwdriver, gently turn the xxxx until the display shows the correct humidity level. You can refer to a reliable reference hygrometer or a known accurate source for comparison.
7. Remove the hygrometer from the water: Carefully remove the hygrometer from the glass of water, ensuring that it is dry before proceeding.
8. Verify the calibration: Place the hygrometer in a stable environment with known humidity levels and compare the readings to ensure accuracy.
Note: It's important to note that the Weewooday X008 Digital Hygrometer Temperature has a high accuracy rating of ±5% RH. Calibration may not be necessary for most users, as the device is designed to provide accurate readings out of the box. However, if you find that the readings are consistently inaccurate, calibration can help improve accuracy.
Add New Comment