User Manual Q&AAnswer
May 24, 2024 - 06:25 AM
To connect the Wonder Workshop DA03 robot to your device, please follow these steps:
1. Charge the robot: Use the included micro-USB charging cable to charge the robot. Connect one end of the cable to the robot and the other end to a power source. Allow the robot to charge fully before proceeding.
2. Power on the robot: Once the robot is fully charged, press the power button to turn it on. You should see a light indicator to confirm that the robot is powered on.
3. Enable Bluetooth: On your device, go to the settings menu and enable Bluetooth. Make sure that Bluetooth is turned on and discoverable.
4. Download the Wonder Workshop app: Visit the App Store (for iOS devices) or Google Play Store (for Android devices) and search for the Wonder Workshop app. Download and install the app on your device.
5. Pair the robot: Open the Wonder Workshop app and follow the on-screen instructions to pair the robot with your device. This typically involves selecting the robot from a list of available devices and confirming the connection.
6. Connection confirmation: Once the robot is successfully paired, you should see a confirmation message on both the app and the robot. The robot is now connected to your device and ready to use.
If you encounter any issues during the connection process, please refer to the troubleshooting section of the user manual or contact Wonder Workshop's customer support for further assistance.
Add New Comment