User Manual Q&AAnswer
May 24, 2024 - 12:46 AM
To adjust the float switch on the Prostormer BOP75020 Submersible Water Pump, follow these steps:
1. Locate the switch xxxx on the pump, labeled "manual/auto".
2. Turn the switch xxxx to the "M" position for manual operation or the "AUTO" position for automatic operation.
3. The pump will automatically turn on when the water level exceeds the set switch-on height and turn off when the water level reaches the set switch-off height.
4. The default switch-on and switch-off heights are approximately 1 inch and 3/4 inch respectively.
5. If you want to adjust the switch-on and switch-off heights, you can do so by using the locking device on the float switch housing.
6. To adjust the switch-on height, turn the locking device clockwise to raise the float switch.
7. To adjust the switch-off height, turn the locking device counterclockwise to lower the float switch.
8. Test the pump to ensure it operates at the desired switch-on and switch-off heights.
Note: Regularly check the float switch for proper functioning and remove any blockages or obstacles that may hinder its movement.
Add New Comment