User Manual Q&AAnswer
May 23, 2024 - 03:15 AM
To set up and install the RTOSY Multi-color Changing Self-rotating Globe, please follow these steps:
1. Prepare the Base and Globe:
- Place the C-shaped base on a stable and level surface.
- Ensure the power cable is connected to the base and plugged into a power source.
2. Position the Globe:
- Hold the globe with one hand and the suspension tool (provided) with the other.
- Align the globe in the center of the C-shaped base.
3. Adjust the Globe:
- Slowly lower the globe, using the suspension tool to guide it.
- Ensure the globe is centered within the C-shaped base as it starts to levitate.
4. Release the Suspension Tool:
- Once the globe is stable and levitating, gently remove the suspension tool.
- The globe should now be floating freely and rotating automatically.
Please refer to the "Install" section in the user manual for visual illustrations of the installation process.
If you encounter any issues during the setup process, please refer to the troubleshooting section in the manual or contact customer support for further assistance.
Add New Comment