User Manual Q&AAnswer
May 23, 2024 - 02:56 AM
Sure! Here are the step-by-step instructions to set up and use the MOKOQI Automatic Spinning Floating Globe:
Step 1: Powering the Frame Base
- Plug in the base and switch it on. The LED light will illuminate, indicating that the base is active.
- Hold the globe and align the north pole upwards, ready to be placed within the magnetic field of the base.
Step 2: Using the Install Tool
- Place the installation tool under the top of the base. Ensure the tool is firmly in place to assist with the levitation process.
- Carefully position the globe so that its north pole is touching the installation tool. This alignment is crucial for the levitation to occur correctly.
Step 3: Achieving Levitation
- Gently adjust the globe until it finds the right balance and starts to levitate. The globe should be floating steadily above the base.
- Ensure that the globe is stable and not wobbling. This stability is essential for smooth and consistent rotation.
Step 4: Removing the Install Tool
- Once the globe is levitating steadily, carefully remove the installation tool. The globe should continue to float without any support.
- Allow the globe to rotate naturally. The magnetic field should keep it spinning smoothly and continuously.
Tips for Successful Setup:
- Patience is Key: The levitation process might take a few attempts to get right. Be patient and make small adjustments until the globe stabilizes.
- Avoid Interference: Keep the setup away from electronic devices that might interfere with the magnetic field.
- Regular Maintenance: Occasionally check the base and globe to ensure they are clean and free from dust, which can affect the levitation.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment