User Manual Q&AAnswer
May 21, 2024 - 12:54 AM
To set the temperature on the INKBIRD ITC-306T Thermostat Temperature Controller, follow these steps:
1. Press the "SET" key for over 3 seconds to enter the parameter setup mode. The "SET" indicator lamp will turn on.
2. The PV window will display the first menu code "TS1", and the SV window will display the corresponding setting value.
3. Press the "SET" key to move to the next menu and display the menu code.
4. Use the "INCREASE" or "DECREASE" key to set the desired temperature value.
5. After setting the temperature, press the "SET" key for 3 seconds to save the changes and exit the setup mode. The controller will return to normal temperature display mode.
Note: If there is no operation for 10 seconds during the setup process, the system will exit the setup mode without saving the changes.
For more detailed instructions and information on other settings, please refer to the user manual provided with the INKBIRD ITC-306T Thermostat Temperature Controller.
Add New Comment