User Manual Q&AAnswer
May 21, 2024 - 12:29 AM
To set the time on the Newentor Q5 Wireless Weather Station, follow these steps:
1. Press and hold the SET button for 2 seconds until the "ON/OFF" starts to flash.
2. Use the °C/°F/－ buttons to set the radio control function to ON or OFF.
3. Press the SET button to confirm your setting and move to the next step.
4. The 12/24HR will start to flash. Use the °C/°F/－ buttons to set the desired hour format.
5. Press the SET button to confirm your setting and move to the next step.
6. The Time Zone will start to flash. Use the °C/°F/－ buttons to set the correct time zone (P/M/C/E).
7. Press the SET button to confirm your setting and move to the next step.
8. The "DST ON/OFF" will start to flash. Use the °C/°F/－ buttons to set the DST (Daylight Saving Time) ON or OFF.
9. Press the SET button to confirm your setting and move to the next step.
10. The Hour will start to flash. Use the °C/°F/－ buttons to set the correct hour.
11. Press the SET button to confirm your setting and move to the next step.
12. The Minute will start to flash. Use the °C/°F/－ buttons to set the correct minute.
13. Press the SET button to confirm your setting and move to the next step.
14. The Month and Date icon will start to flash. Use the °C/°F/－ buttons to select the date display format (Month/Date or Date/Month).
15. Press the SET button to confirm your setting and move to the next step.
16. The Year will be displayed and start to flash. Use the °C/°F/－ buttons to set the correct year.
17. Press the SET button to confirm your setting and move to the next step.
18. The Month will start to flash. Use the °C/°F/－ buttons to set the correct month.
19. Press the SET button to confirm your setting and move to the next step.
20. The Date will start to flash. Use the °C/°F/－ buttons to set the correct date.
21. Press the SET button to confirm your setting and move to the next step.
22. The Weather forecast pattern will start to flash. Use the °C/°F/－ buttons to select the current weather pattern.
23. Press the SET button to confirm your setting and move to the next step.
24. The Air Pressure Unit will display and start to flash. Use the °C/°F/－ buttons to choose the air pressure unit you need.
25. Press the SET button to confirm your setting and move to the next step.
26. The Air Pressure Value will start to flash. Use the °C/°F/－ buttons to set the local standard pressure value.
27. Press the SET button to confirm your setting and end the setting procedure. The display will return to the normal mode with the updated time.
Please refer to the Newentor Q5 Wireless Weather Station User Manual for more detailed instructions and illustrations.
Add New Comment