User Manual Q&AAnswer
May 20, 2024 - 11:44 PM
To assemble and use the Aitey 312 Wand Bubble Machine, please follow the steps below:
1. Check that all the parts are included in the package before opening it.
2. Insert 4 AA batteries into the bubble wand, making sure they are inserted correctly.
3. Connect the bubble solution to the bubble wand following the provided instructions.
4. Securely attach the detachable shining wings to the bubble stick.
5. Press the "Start" button to turn on the bubble machine and see how it works.
6. If desired, use the control buttons to make any settings or feature changes.
7. Place the bubble machine on a steady, flat surface to prevent it from falling over during operation.
8. Keep an eye on the bubble solution level and refill as needed to continue making bubbles.
9. Supervise children while they set up and play with the bubble machine to ensure safety and proper usage.
10. Experiment with blowing bubbles in different places and settings for maximum enjoyment.
11. Clean the bubble wand and wings regularly to remove any dirt or dust buildup.
12. After use, turn off the bubble machine, unplug it, and wipe down the bubble wand and wings with a wet cloth.
13. Allow the bubble machine and all its parts to dry fully before storing them in a cool and dry place.
14. For additional setup directions and tips, refer to the user manual provided with the product.
Please note that this answer is based on the information provided in the user manual for the Aitey 312 Wand Bubble Machine. For more specific instructions or troubleshooting, it is recommended to refer to the manual or contact Aitey's customer service.
Add New Comment