User Manual Q&AAnswer
May 20, 2024 - 05:25 AM
If your Juboury Automatic Bubble Blower is not consistently producing bubbles, there are a few troubleshooting steps you can try:
1. Check the bubble solution reservoir: Ensure that the bubble solution reservoir is adequately filled and not clogged. Make sure you are using a high-quality bubble solution that is suitable for bubble machines.
2. Clean the bubble wand: Inspect the bubble wand for any blockages or residue that may be hindering bubble production. Clean the bubble wand with water and a mild soap solution, then rinse and dry it thoroughly.
3. Adjust the blower's angle and settings: Experiment with the blower's angle and settings to optimize bubble output. Try adjusting the blower's position and angle to see if it improves bubble production.
4. Check for obstructions: Ensure that there are no obstructions in the airflow vents of the bubble blower. Clear any debris or blockages that may be affecting the blower's performance.
5. Test with a different bubble solution: If the issue persists, try using a different bottle of bubble solution to rule out any quality issues with the current solution.
If none of these steps resolve the issue, it is possible that there may be a defect with the bubble blower. In such cases, it is recommended to contact SHLDEAL's customer service for further assistance or to inquire about warranty coverage.
Add New Comment