User Manual Q&AAnswer
May 20, 2024 - 04:05 AM
To charge the Force1 F1-SCTLED-RBL-CA Scoot LED Hand Operated Drone, follow these steps:
1. Plug in the included USB charging cable into your DC power source. You can use the USB port of your computer/laptop or a power bank with a current input of 0.5-2.0A.
2. Plug in the round pin of the charging cable into the charging socket located on the bottom of the drone, on the opposite side of the ON/OFF switch.
3. Make sure not to exceed 50 minutes of charge time, as exceeding the charging time may damage the drone.
4. Allow the drone to rest for 10 minutes between flights.
It takes approximately 50 minutes to fully charge the Force1 F1-SCTLED-RBL-CA Scoot LED Hand Operated Drone using the included USB charging cable.
Please note: Do not plug the charging cable into an A/C power source. Using a wall charger and plugging it into a wall outlet may cause a high peak current, which can be harmful to the drone.
For more information and detailed instructions, please refer to the user manual provided with the drone.
Add New Comment