User Manual Q&AAnswer
May 20, 2024 - 03:57 AM
To charge the Sphero S003 Bolt, follow these steps:
1. Connect the inductive charging base to a power source using the provided USB charging cable.
2. Place the Sphero Bolt on the charging base, aligning the charging contacts on the ball with the contacts on the base.
3. The charging base will emit a pulsing light to indicate that the Sphero Bolt is charging.
4. Leave the Sphero Bolt on the charging base until it is fully charged. The charging time may vary, but it typically takes about 6 hours for a full charge.
5. Once the Sphero Bolt is fully charged, you can remove it from the charging base and begin using it.
It is important to note that you should not charge the Sphero Bolt immediately after use while it is still hot. Allow it to cool down to room temperature before charging. Additionally, make sure to use only the supplied Power Adapter (Model: PA1005-120DIB050 12vDC 500mA) to avoid any electrical issues.
For more detailed information on charging and battery safety, please refer to the "Battery Warning" section in the Sphero S003 Bolt User Manual.
Add New Comment