User Manual Q&AAnswer
May 20, 2024 - 03:50 AM
To set up and mount the Arachnid Cricket Pro 450 Electronic Dartboard, follow these steps:
1. Choose a location to hang the dartboard where there is about 10 feet of open space in front of the board. The "toe-line" should be 7' 9 1/4" from the face of the dartboard.
2. Locate a wall stud and place a mark 76.75" from the floor. Insert a xxxx in the center of the wall stud at this height and hang the dartboard on this xxxx . If not mounting into studs, be sure to use drywall anchors or other securing hardware appropriate to the wall you are using.
3. If you want to mount the dartboard even more securely to the wall, you can fasten four screws (not included) through the holes located in the catch ring area (the area outside the scoring segments). This will secure the board to the wall. The center of the bullseye should be 5' 8" from the ground.
4. Plug the A/C adapter (if provided, some models are battery powered) into the wall outlet and into the jack at the bottom right of the dartboard, and you're ready to play.
Please refer to the owner's manual for more detailed instructions and illustrations.
Add New Comment