User Manual Q&AAnswer
May 20, 2024 - 03:46 AM
To mount the Arachnid Cricket Pro 650 Electronic Dartboard on the wall, follow these steps:
1. Choose a location to hang the board that is near an electrical outlet and has at least 10 feet of open floor space in front of the board.
2. Locate a wall stud and place a mark 76 3/8” (194cm) up from the floor along the stud.
3. Place another mark 16” (40.64cm) below the first mark.
4. Drill a small pilot hole into each reference mark.
5. xxxx in a #10-16x1 3/4” long slotted truss-head mounting xxxx (provided) into each pilot hole until the xxxx head is protruding about 1/2” (12.7mm) from the wall.
6. Line up the slotted mounting holes on the back of the game with the xxxx heads and then mount the game.
7. It may be necessary to adjust the xxxx until the board fits snugly against the wall.
8. After the board is mounted, the bulls’-eye should be 68” (172.72cm) above the floor.
9. Place a toe line 97 1/2” (248cm) from the wall as a guide for throwing distance. In tournament play, adhesive tape 2 feet long and 2 1/2 inches wide is used, but if it is not available, a strip of household masking tape will suffice.
Please refer to the owner's manual for additional information and illustrations on mounting the dartboard.
Add New Comment