User Manual Q&AAnswer
May 20, 2024 - 03:44 AM
To mount the Franklin Sports 3643X Electronic Dart Board on the wall, follow these steps:
1. Choose a location to hang the dartboard where there is about 10 ft (304.8 cm) of open space in front of the board.
2. Measure and mark the wall for the top xxxx hole. Locate a wall stud and place a mark 75.5 in (192 cm) from the floor.
3. Measure down 12.4 in (31.5 cm) from the top mark and make a temporary reference mark for the bottom two screws. Do not drill a hole for the temporary reference mark.
4. Measure 5.3 in (13.5 cm) to the left of the reference mark for the bottom left xxxx hole and make another mark. Then, measure 5.3 in (13.5 cm) to the right of the reference mark for the bottom right xxxx hole.
5. Insert mounting screws in the center of the marks you made, avoiding the temporary reference mark.
6. Mount the dartboard on the wall by lining up the holes on the back with the screws. It may be necessary to adjust the screws until the board fits snugly against the wall.
7. The center of the Bullseye should be 5 ft 8 in (1.8 m) from the floor when finished.
Please refer to the owner's manual for additional information and illustrations on mounting the dartboard.
Add New Comment