User Manual Q&AAnswer
May 20, 2024 - 03:41 AM
To set the temperature on the INKBIRD ITC-1000F Digital Temperature Controller, follow these steps:
1. Press the "SET" key for more than 3 seconds to enter the set mode. The set indicator lamp will turn on, and the screen will display the first menu code "TS".
2. Use the "▲" or "▼" key to move up or down the menu items and display the desired menu code.
3. Press the "SET" key to enter the parameter setting of the current menu. The parameter value will start flashing.
4. Use the "▲" or "▼" key to adjust the parameter value of the current menu.
5. After setting the desired value, press the "SET" key to exit the parameter setting of the current menu. The parameter value will stop flashing.
6. Repeat steps 2-5 to set other functions if needed.
7. In any status, press the "SET" key to save the modified parameter value and return to the normal temperature display.
Note: If no operation is performed within 10 seconds, the controller will automatically exit the menu without saving any parameter modifications.
For more detailed instructions and information on other menu codes, please refer to the INKBIRD ITC-1000F Digital Temperature Controller User Manual.
Add New Comment