User Manual Q&AAnswer
May 09, 2024 - 03:45 AM
To change the default master code on the TeeHO TE002 Keypad Deadbolt with Fingerprint, please follow these steps:
1. Ensure that the lock is installed and the batteries are inserted.
2. Press the reset button located on the interior assembly of the lock.
3. Take out one battery and then place it back in while still holding the reset button.
4. Continue holding the reset button for 3 seconds until you hear a beep sound.
5. Release the reset button.
6. Enter the default master code "12345678" on the keypad.
7. Press the "#" button.
8. Enter a new master code of your choice using 4 to 10 digits.
9. Press the "#" button to confirm the new master code.
10. The master code has now been successfully changed.
Please refer to the product manual for more detailed instructions and illustrations if needed.
Add New Comment