User Manual Q&AAnswer
May 09, 2024 - 01:52 AM
To reprogram the BRIGHTSTAR BR100B Clean Remote Control for your TV brand, follow these steps:
1. Manually turn on your TV.
2. Press and hold the SET-UP key on the remote until the LED blinks and stays on. Then release the button.
3. Enter the 3-digit code from the code table provided in the manual. After entering the code, the indicator light will turn off, indicating completion.
Note: If the LED blinks rapidly after entering the code, you may have entered an invalid code. Double-check the code list and try again. If the volume and channel functions don't work, try another code.
If your TV brand is not listed or the TV doesn't respond, you can try using the code search method:
1. Turn on your TV.
2. Press and hold the SET-UP key until the LED blinks and stays on, then release the button.
3. Press the channel up button slowly and repeatedly (this may take 60 or more times) until the channel changes.
4. Press ENTER to lock in the code.
Note: If you pass the code, press the CH- key to go backward through the library until the TV changes channels again, then press ENTER to lock in the code. You can identify the code for future use with the code identification steps provided in the manual.
It's important to note that reprogramming the remote will make it operate only the brand you reprogrammed it for.
Add New Comment