User Manual Q&AAnswer
May 09, 2024 - 01:46 AM
To connect the SURMEN GT61 Mechanical Keyboard to your device via Bluetooth, follow these steps:
1. Make sure the keyboard is turned on and in Bluetooth mode. You can switch to Bluetooth mode by pressing the FN+E, FN+R, or FN+T combination key, depending on the desired Bluetooth channel.
2. Long press the FN+E/R/T combination key for 3 seconds until the keyboard enters the code matching state. The backlight will flash quickly.
3. On your device, enable Bluetooth and search for available devices.
4. Look for "BT3.0 KB" or "BT5.0 KB" in the list of available devices, depending on the Bluetooth version you are using.
5. Select the SURMEN GT61 Mechanical Keyboard from the list of available devices on your device.
6. The keyboard will attempt to establish a connection with your device. The backlight will flash slowly during the Bluetooth reconnection process.
7. Once the connection is successful, the current light effect will be restored on the keyboard.
Note: If the connection is unsuccessful, the keyboard will go to sleep. You can wake it up by pressing any key, and it will continue to reconnect. If the reconnection fails within 10 seconds, the keyboard will enter sleep mode. If pairing is successful, it will enter pairing mode again.
Add New Comment