User Manual Q&AAnswer
May 08, 2024 - 11:27 PM
To change the set point on the Dixell XR06CX Digital Controller, follow these steps:
1. Press and hold the SET key for more than 2 seconds.
2. The current set point value will be displayed, and the "°C" or "°F" LED will start blinking.
3. Use the arrow keys to increase or decrease the displayed value to the desired set point.
4. Press the SET key again or wait 10 seconds to save the new set point value.
5. The controller will now use the new set point for regulation.
Please refer to the instruction manual for more information and detailed instructions on using the Dixell XR06CX Digital Controller.
Add New Comment