User Manual Q&AAnswer
May 07, 2024 - 02:22 AM
To pair the doorbell and dingdong devices, follow these steps:
1. Plug the Dingdong device into a power source.
2. Long press the Dingdong match button for 2 seconds until the indicator light turns on, indicating that it has entered pairing mode.
3. Press the doorbell button once. The doorbell and dingdong devices will pair with each other.
4. After successful pairing, the indicator lights on both devices will turn off.
Please note the following:
- During pairing, make sure the doorbell and dingdong devices are as close to each other as possible.
- Ensure that the doorbell is fully charged before pairing.
- If you don't ring the doorbell within ten seconds, the dingdong indicator will automatically turn off.
- If pairing fails or re-pairing is required, please repeat the pairing process.
For more detailed instructions, please refer to the "Pair Doorbell & Dingdong" section in the user manual.
Add New Comment