How do I set up the BG ELECTRICAL N300 Wi-Fi Socket Range Extender? (BG ELECTRICAL N300 Wi-Fi Socket Range Extender Instruction Manual)

Answer

manuals.plus

May 07, 2024 - 01:23 AM

To set up the BG ELECTRICAL N300 Wi-Fi Socket Range Extender, follow these steps:

1. Positioning Your Wi-Fi Socket:
   - Place the Wi-Fi socket halfway between your router and the Wi-Fi dead-zone.
   - Use the signal strength indicator on your mobile device to determine the mid-signal point.
   - Choose a location away from Bluetooth devices and other household electronics to minimize signal interference.

2. Wiring Instructions:
   - Power off before commencing work and always isolate the power at the consumer unit/fuse box.
   - If replacing an existing socket, unscrew the socket from the wall/mounting box.
   - Note the cable connections and unscrew each terminal to release the wires.
   - Connect the wires to the appropriate terminals on the Wi-Fi socket.

3. USB Charger Information:
   - The USB port on the product can charge mobile devices such as mobile phones, MP3 players, and tablets.
   - The USB output is 5.0V DC 2.1A, 10.5W MAX.

4. Wi-Fi Socket Setup Instructions:
   - Ensure that your Wi-Fi socket is connected to the power supply.
   - After the initial power up, the LED indicator will illuminate with a solid blue light.
   - Proceed with your preferred method of connection: web browser, QR code, or WPS (Wi-Fi Protected Setup).

For detailed step-by-step instructions and troubleshooting, please refer to the BG ELECTRICAL N300 Wi-Fi Socket Range Extender Instruction Manual provided.