User Manual Q&AAnswer
May 07, 2024 - 01:21 AM
To program the PIL1044 Universal Sharp TV Remote Control to work with your Sharp TV, follow these steps:
1. Install the batteries in the remote control.
2. Test if the remote control works by trying to control your Sharp TV. If it works, there is no need to set it up further.
3. If the remote control doesn't work, you will need to input a code specific to your Sharp TV model. Follow these steps:
a. Press and hold the MUTE and POWER buttons on the remote control for 3 seconds until the LED indicator starts flashing. Then release the buttons.
b. Enter the 3-digit code for your Sharp TV using the number buttons on the remote control. If the code is correct, the LED indicator will turn off. If the code is incorrect, the LED indicator will remain on. In that case, try entering the code again.
c. If the remote control still doesn't work, try another code from the provided code list in the manual.
Note: To exit the pairing mode, press the MUTE button.
Question: How can I find out the code for my Sharp TV using the PIL1044 Universal Sharp TV Remote Control?
Answer: To find out the code for your Sharp TV using the PIL1044 Universal Sharp TV Remote Control, follow these steps:
1. Press and hold the MUTE button on the remote control, then press the POWER button. After about 3 seconds, the LED indicator will light up. Release the buttons.
2. Enter the numbers 9, 9, 0 using the number buttons on the remote control. The LED indicator will flash twice and then turn off.
3. Enter the numbers 1, 2, 3. After pressing the 1 button, the LED indicator will start flashing. The number of flashes indicates the first number of the code. If the code number is 0, the LED indicator will not flash.
Example: If the LED indicator flashes 5 times, the code's first number is 5.
4. Repeat step 3 for the second and third numbers of the code.
5. Once you have determined the code, you can use it to program the remote control as mentioned earlier.
Question: How do I use the learning function on the PIL1044 Universal Sharp TV Remote Control?
Answer: The learning function on the PIL1044 Universal Sharp TV Remote Control allows you to program it to control additional functions of your TV using the original remote control. Follow these steps to use the learning function:
1. Press and hold the MUTE and VOL+ buttons on the PIL1044 remote control for about 5 seconds. Release the buttons when the LED indicator lights up.
2. Point the original remote control towards the PIL1044 remote control, ensuring a distance of 1-3 cm between them.
3. Press any button on the original remote control. When the PIL1044 remote control receives the information, the LED indicator will flash. Release the button on the original remote control, then press the corresponding button on the PIL1044 remote control. The LED indicator will flash twice and then stay lit.
4. Repeat step 3 for each additional button you want to program.
5. After programming all the buttons, press and hold the MUTE button on the PIL1044 remote control, then press the VOL- button. The LED indicator will turn off, indicating that the learning has been saved.
Note: If no button is pressed within 25 seconds during the learning process, the learning will finish without saving.
Question: How does the one-button learn function work on the PIL1044 Universal Sharp TV Remote Control?
Answer: The one-button learn function on the PIL1044 Universal Sharp TV Remote Control allows you to copy the functions of one remote control to another identical remote control. Follow these steps to use the one-button learn function:
1. Note that remote control A is the fully learned remote control, and remote control B is the remote control that needs to be learned.
2. Align the head of remote control A with the head of remote control B at a distance of 1-3 cm without shaking.
3. On remote control B, press and hold the MUTE and 3 buttons for more than 3 seconds. When the LED indicator lights up, release the buttons. Remote control B is now ready for learning.
4. On remote control A, press and hold the MUTE and 1 buttons for more than 3 seconds. When the LED indicator lights up, release the buttons. When the LED indicators on both remote controls start flashing, the learning function is activated. When the LED indicators on both remote controls flash three times slowly and then turn off, it means that the learning has finished.
Note: After the learning process, check if remote control B works. If it doesn't, repeat steps 1-3. You can exit the one-button learn function by pressing the MUTE and VOL- buttons.
Add New Comment