User Manual Q&AAnswer
May 06, 2024 - 06:39 AM
To install the heatmiser Slimline-RF V3 Programmable Wireless Thermostat, follow these steps:
1. Mount the thermostat at eye level and make sure to read the instructions fully for the best results.
2. Do not install the thermostat near a direct heat source as this can affect its functionality.
3. Ensure that the thermostat is not covered by curtains or blocked by furniture, as it needs a free flow of air to sense the temperature.
4. Use the backplate of the thermostat as a positioning template and mark two hole positions on the wall. Drill at the marked positions and insert wall plugs into each hole.
5. xxxx the thermostat backplate securely onto the wall.
6. Clip the front of the thermostat onto the backplate.
For more detailed instructions and illustrations, please refer to the installation procedure section in the heatmiser Slimline-RF V3 Programmable Wireless Thermostat manual.
Note: It is recommended to consult a professional if you are unsure about the installation process.
Add New Comment