User Manual Q&AAnswer
May 06, 2024 - 06:39 AM
To arm the Texecom INS555-3 Premier Elite Series Alarm System, follow these steps:
1. Ensure that all doors and windows are closed and the Ready light is on.
2. Enter a valid User code on the keypad.
3. Press the "yes" button to arm the system. The exit tone will sound.
4. Leave the premises. The exit tone will stop when the system has armed.
Note: If your installer has programmed the system to allow arming by just pressing "area", you can skip step 2 and directly press "area" to arm the system.
Add New Comment