User Manual Q&AAnswer
May 06, 2024 - 05:50 AM
8To set up the Bestway LAY-Z-SPA Miami Airjet Swimming Pool, follow these steps:
1. Select a suitable location: Choose a smooth, flat, and level surface that can support the weight of the spa, water, and users. Make sure there is access to a power source and a floor drain if installing outdoors.
2. Inflate the spa: Use the provided pump to inflate the spa. Make sure to follow the inflation instructions in the owner's manual and do not overinflate the spa.
3. Connect the pump: Attach the pump to the spa using the provided adapters. Make sure the connections are secure and tight.
4. Fill the spa with water: Use a hose to fill the spa with water. The water level should be between the minimum and maximum fill lines indicated on the spa.
5. Plug in the pump: Connect the pump to a grounded power outlet. Make sure to follow the safety instructions in the owner's manual regarding electrical connections.
6. Set the temperature: Use the temperature adjustment buttons on the control panel to set the desired water temperature. The default temperature is 35°C (95°F).
7. Activate the heating system: Press the heat button on the control panel to activate the heating system. The light above the heat button will turn red to indicate that the heating system is working.
8. Enjoy the spa: Once the water has reached the desired temperature, you can enter the spa and enjoy the relaxing experience. You can also activate the massage system by pressing the massage system button.
For more detailed instructions and safety precautions, please refer to the Bestway LAY-Z-SPA Miami Airjet Swimming Pool Owner's Manual.
Add New Comment