User Manual Q&AAnswer
May 04, 2024 - 06:02 AM
To change the braking mode on the REDARC EBRH-ACCV3 Tow-Pro Elite Electric Trailer Brake Controller, follow these steps:
1. Ensure that a trailer is connected to the controller.
2. Bring the vehicle to a complete stop.
3. Rotate the control xxxx fully counter-clockwise.
4. Apply the vehicle brakes.
5. Double-click the control xxxx (two pushes within 1 second).
6. Release the vehicle brakes.
After completing these steps, the braking mode will be changed. If the LED on the control xxxx is glowing blue, the controller is in Proportional Mode. If the LED is glowing green, the controller is in User Controlled Mode.
Please refer to page 20 of the REDARC EBRH-ACCV3 Tow-Pro Elite Electric Trailer Brake Controller User Manual for more information and visual instructions on changing the braking mode.
Add New Comment