User Manual Q&AAnswer
May 04, 2024 - 05:26 AM
To connect your FFALCON LED TV to the internet, you have two options: wired or wireless connection. Here are the steps for each method:
Wired Connection:
1. Ensure you have an Ethernet cable long enough to reach your TV, a router or modem with an available Ethernet port, and a high-speed internet connection.
2. Connect one end of the Ethernet cable to the router/modem and the other end to the LAN (RJ45) port on the back of the TV.
3. On your TV, go to the Network & Internet menu. This can usually be accessed by pressing the Menu button on your remote control and navigating to the Network or Settings section.
4. Select the Wired connection option and follow the on-screen instructions to configure the network settings. This may include entering your Wi-Fi password or selecting your network from a list of available networks.
5. Once the connection is established, you should see a confirmation message on your TV screen. You can now access online content using your TV's smart features.
Wireless Connection:
1. Ensure you have a router broadcasting a high-speed wireless signal and a high-speed internet connection.
2. On your TV, go to the Network & Internet menu. This can usually be accessed by pressing the Menu button on your remote control and navigating to the Network or Settings section.
3. Select the Wireless connection option and follow the on-screen instructions to scan for available networks.
4. Select your Wi-Fi network from the list and enter your Wi-Fi password if prompted.
5. Once the connection is established, you should see a confirmation message on your TV screen. You can now access online content using your TV's smart features.
Note: The exact steps may vary slightly depending on your specific TV model and software version. For more detailed instructions, please refer to the UF3 SERIES User Manual provided with your TV or visit the FFALCON website for support.
Add New Comment