User Manual Q&AAnswer
May 04, 2024 - 05:23 AM
To install the Dometic RM2350 3 Way Fridge and Freezer 90L, you will need to follow the installation instructions provided in the manual. Here are the general steps:
1. Ensure that the installation is performed by an authorized/qualified person and in accordance with the manufacturer's instructions, local regulations, and building codes.
2. Remove all parts of the packaging to ensure nothing obstructs the appliance or combustion exhaust gases.
3. Install the necessary ventilation system, such as the Dometic ventilation kit, to separate the combustion system from the living space. This includes one lower fresh air intake and one upper exhaust vent.
4. Provide an opening at floor level in the refrigerator compartment for ventilation of heavier-than-air fuel gases.
5. Ensure that the clearances to combustible materials are maintained as specified in the manual.
6. If the design of the vehicle does not allow for the top exhaust vent directly above the condenser, use the deflector plate provided to compensate for the lowered vent.
7. Install the refrigerator in a substantial enclosure, ensuring it is level and not directly on carpeting. Use a metal or wood panel beneath the appliance if necessary.
8. Secure the refrigerator in the enclosure using screws and plugs as instructed in the manual.
9. Connect the gas supply system using approved materials and connectors. Check for leaks using a non-corrosive bubble solution.
10. For electrical connection, follow the instructions for mains voltage operation or 12V DC operation, depending on your setup. Ensure proper grounding and use the supplied power cord.
11. Re-hinge the door if necessary, following the steps provided in the manual.
12. Mount the door panel before installing the refrigerator in the enclosure, following the dimensions and instructions provided.
13. Test the operation of the refrigerator and ensure it is functioning correctly. If any issues arise, contact your local Dometic Service provider.
Please refer to the complete installation instructions in the manual for detailed guidance and any additional steps specific to your installation.
Add New Comment