User Manual Q&AAnswer
May 04, 2024 - 05:20 AM
To properly inflate the Kmart 6FT Junior Stand up Paddle Board, follow these steps:
1. Unscrew the valve cap and press down on the pin to open the valve. Let the air flow naturally into the product, then press down on the pin again to close the valve (in the UP position).
2. Make sure the pump hose is connected to the 'inflate' outlet.
3. Attach the pump hose clockwise onto the valve.
4. Start pumping air into the board by sliding the piston up and down until the board is fully inflated.
5. After inflation, xxxx the valve cap and tighten it with the valve wrench.
Note: The design working pressure is 15psi (1.0bar), and the maximum inflated air pressure is 12psi. Do not overinflate the board, and do not use an electric power high-pressure pump to inflate it.
For visual instructions, you can also refer to the provided YouTube video: https://youtu.be/O74LLm3tP4A
Please ensure you read the complete instruction manual for additional safety precautions and guidelines before using the product.
Add New Comment