User Manual Q&AAnswer
May 04, 2024 - 02:11 AM
Anchoring the Monkey Bar Swing Set is necessary to prevent tipping, lifting, and overturning. It is recommended to anchor the swing set in concrete, especially in soft or sandy soil. To anchor the swing set in concrete, follow these steps:
1. Dig a hole at least 5 inches (12.7cm) deep and 10 inches (25.4cm) to 12 inches (30.5cm) in diameter.
2. Place the swing set leg in the hole, preferably on a brick or stone to prevent sinking.
3. Set the swing leg 3 inches (7.6cm) below the ground.
4. Pour concrete around the legs and fill the hole.
5. Cover the concrete adequately using the recommended surfacing instructions in the manual.
6. Allow the concrete to set according to the concrete manufacturer's instructions before use.
Please refer to the "Anchoring" section in the instruction manual for more detailed information and illustrations.
Note: It is important to securely anchor the swing set before use to prevent unexpected movement, which may result in serious injury or death.
Add New Comment