User Manual Q&AAnswer
Apr 29, 2024 - 03:06 AM
To sync your ASC-2680 drone with the controller, follow these steps:
1. Before starting, make sure the power on your controller is off and the battery is removed from the ASC-2680.
2. Insert the battery into the ASC-2680 and set it down on a flat level surface. Press down the power button and hold for a few seconds. The LED lights on the drone should begin to flash rapidly.
3. Quickly turn on the remote and you will notice that the top red LED light on the face of the controller is flashing.
4. Push the throttle stick all the way up until it stops and then pull it back all the way down to the bottom. When pushing the stick up or pulling the stick down, you should hear a high-pitched beep both ways.
5. If the indicator lights on the drone and controller stop flashing and stay solid, you have successfully synced your ASC-2680 and are ready to fly. If you are not able to sync, please repeat steps 1-4 again.
Note: It is recommended to sync your drone indoors or in the shade to make it easier to see the LED light indicators.
Add New Comment