User Manual Q&AAnswer
Apr 29, 2024 - 01:50 AM
To pair the receiver with the door sensor in the SECRUI Wireless Door Open Chime Kit, follow these steps:
1. Press and hold the button on the receiver for more than 3 seconds until it beeps once.
2. Move the door sensor (magnetic strip) closer to the receiver. The receiver will beep twice.
3. Move the door sensor away from the receiver and then bring it back close again. The receiver will beep once.
4. Short press the button on the receiver.
5. The music will start ringing, indicating that the pairing is successful.
If you want to add a second door sensor or more, repeat the above steps.
Note: If you want to pair a door sensor with a fixed receiver ringtone, follow the same steps but select your favorite tone by short pressing the button on the receiver before starting the pairing process.
Add New Comment