How do I install the BK-S2 Bluetooth headset on my helmet? (BIKECOMM BK-S2 Bluetooth Headset User Manual)

Answer

manuals.plus

Apr 29, 2024 - 01:45 AM

To install the BK-S2 Bluetooth headset on your helmet, follow these steps:

1. Clean the area with a cleaning wipe before applying the adhesive pads.
2. Speaker installation:
a. Tear off the paper cover of the speaker pad and paste it to the helmet headphone jack.
b. Locate the proper positions for the speakers before pasting.
c. Paste the velcro adjustment pad to narrow the gap between the ear and the speaker.
d. Connect the USB Type C speaker cable (red connector) with the speaker connector (red connector) following the arrow sign.

3. Microphone installation:
a. For a 3/4 face helmet: Remove the paper on the microphone pad and attach it to the velcro pad inside the left side of the helmet. Put back the inner lining and move the microphone white triangle spot toward the mouth position. Connect the USB Type C microphone cable (yellow connector) with the 3/4 open face helmet microphone connector (yellow connector) following the arrow sign.
b. For an open face helmet: Remove the paper on the velcro pad and attach it to the inside of the helmet chin protector. Attach the microphone to the velcro. Connect the USB Type C microphone cable (yellow connector) with the full-face helmet microphone connector (yellow connector) following the arrow sign.

4. Headset fixture installation:
a. Remove the cover of the adhesive pad on the back of the headset fixture and fix it to the helmet. Do not remove the fixture from the helmet for 12 hours to assure maximum adhesion.
b. Fix the headset by inserting the two raised tenons in the back of the headset into the two holes of the fixture and sliding down to secure the headset tightly.
c. To remove the headset, push it upwards to remove it from the fixture.

5. Connect the USB Type C speaker and microphone cable to the headset and tighten the clasp. Untie the clasp to remove the headset from the fixture.

6. Fix the USB Type C speaker and microphone cable protection cover to the helmet tightly.

Note: It is important to read the user manual and follow the instructions carefully to ensure proper installation and usage of the BK-S2 Bluetooth headset.