User Manual Q&AAnswer
Apr 27, 2024 - 05:16 AM
To install the Govee H61A2 RGBIC LED Neon Rope Lights, follow these steps:
1. Ensure that you have unpacked all the items listed in the packing list and have checked whether the neon rope light lights up when powered on.
2. Wipe the surface where you want to install the lights to ensure it is clean and dry.
3. After tearing off the adhesive film, stick the buckle to the desired location and press it firmly. If necessary, you can reinforce the buckle with a xxxx .
4. Clip the neon rope light into the buckle.
5. Peel off the protective film on the control box and stick it on. Place the control box close to the music source for the best music effect.
6. Power on the neon rope lights and start using them.
For more detailed instructions and illustrations, please refer to the user manual provided with the product.
Note: The neon rope lights should not be installed near any heat sources or potentially dangerous scenes. Also, unroll the neon rope lights before powering them on.
Please refer to the user manual for further troubleshooting steps and safety instructions.
Add New Comment