How do I install the Govee H6081 Stick On Night Light? (Govee H6081 Stick On Night Light User Manual)

Answer

manuals.plus

Apr 26, 2024 - 07:12 AM

To install the , you have three options:

Option A: Installing with the 3M Adhesive
1. Stick the 3M adhesives on the mounting bracket and remove the protective film on the adhesives.
2. Stick the mounting bracket onto the wall, ensuring that the arrow on the bracket is pointing down.
3. Align the holes on the back of the device with the pins on the bracket and slide down to mount the device.

Note: Be careful when selecting the surface to adhere the mounting bracket to, as removing it may cause damage.

Option B: Installing with Screws
1. Measure a distance of 1.74in (44.2mm) between two points for the plastic anchors. Use a pen to mark the drill points.
2. Use a drill bit to drill two 0.98in (25mm) deep holes and fully insert the plastic anchors into the holes.
3. Align the mounting bracket with the plastic anchors and hold it against the wall. Insert the screws through the fixing holes and  xxxx  them firmly into the plastic anchors.
4. Make sure the arrow on the mounting bracket is pointing down.
5. Align the holes on the back of the device with the pins on the bracket and slide down to mount the device.

Option C: Placing on the Desktop
Simply place the night light on a desktop or any flat surface.

Please refer to the user manual for visual illustrations and additional details on the installation process.