User Manual Q&AAnswer
Apr 25, 2024 - 02:02 AM
To install the stands for your INSIGNIA NS-32F201NA23 HD 60Hz LED TV, follow these steps:
1. Place your TV face-down on a cushioned, clean surface.
2. Align the TV stand xxxx holes with the holes on your TV's bottom.
3. Use a Phillips screwdriver and the four provided screws to secure the stands to your TV.
If you prefer to mount your TV on a wall, follow these steps:
1. Before mounting, make sure to remove the stands from your TV.
2. Ensure that the wall-mount bracket you have supports the weight of your TV. Refer to the instructions that came with your wall mount for specific installation steps.
3. Important: Your TV has four VESA mounting holes on the back. It is crucial to secure a wall-mount bracket to all four holes to prevent the TV from falling and causing damage or injury.
4. Note: Wall-mount screws are not included. You will need screws of type M4, 16 mm to 20 mm in length, depending on the wall mount.
5. Refer to the VESA Mounting Pattern specifications in the user guide (100 × 100 mm) to ensure compatibility with your wall mount.
Please refer to the user guide for additional information and illustrations on installing the stands or a wall mount for your INSIGNIA NS-32F201NA23 HD 60Hz LED TV.
Add New Comment