User Manual Q&AAnswer
Apr 22, 2024 - 05:05 AM
To switch between transmitter and receiver modes on the iMars KN319 Bluetooth Transmitter Receiver Adapter, follow these steps:
1. Make sure the adapter is powered on and in pairing mode.
2. Locate the mode switch button on the adapter. It is usually labeled with "TX" for transmitter mode and "RX" for receiver mode.
3. Press and hold the mode switch button for a few seconds until the LED indicators on the adapter start flashing.
4. The LED indicators will usually alternate between red and blue, indicating that the adapter is in pairing mode and ready to connect to your audio devices.
5. To switch to transmitter mode, press the mode switch button again until the LED indicators show a steady blue light. This means the adapter is now in transmitter mode and ready to pair with your non-Bluetooth audio source.
6. To switch to receiver mode, press the mode switch button again until the LED indicators show a steady red light. This means the adapter is now in receiver mode and ready to pair with your Bluetooth headphones or speakers.
7. Once the adapter is in the desired mode, you can proceed with the pairing process according to the instructions in the user manual.
Please refer to the user manual that came with your iMars KN319 adapter for specific instructions and any additional details regarding the mode switching process.
Add New Comment